CPA201-220 electric actuator control modules (3410,3610,3810 series electric actuators), its main components
Were taken directly under orders to Japanese manufacturers, air national assembly, and a fundamental guarantee for product quality and life expectancy.
Model: CPA100-220-220, CPA101 CPA201-220
◆ actuator design of the servo system (no need to reprovision the servo amplifier), simply access DC4 ~ 20mA (or room DC1 ~ 5V) signal and AC220V single-phase power can work. Equipped with boundary terminals, the wiring is extremely simple and convenient.
◆ actuator key components - controller, using the most advanced hybrid integrated circuit, casting resin seal, was box-shaped, small size and high reliability.
◆ drive the amount of feedback detection using high-performance conductive plastic potentiometer with a resolution of <0.4%
◆ have the self-diagnostic function, when a failure occurs, the indicator on the controller will immediately issue a direction signal.
◆ state select switch to set the positive and negative action.
◆ state selector switch can be set to the input signal of DC4 ~ 20mA or room DC1 ~ 5V.
◆ adjustment of zero (start) and a journey (end) is simple.
When a sudden power failure, to ensure that the valve core self-locking.
◆ use the gear transmission, and high reliability.
◆ Intelligent limit than the limit switch performance is more stable and reliable.
◆ delay protection function, the rated load, can carry the state since the lock, failure occurs, can start protection, and can reverse running cancel the delay protection.
◆ hybrid integrated circuit, strict temperature, fatigue, aging treatment, the resin sealing casting, moisture, shock
Exceed the rated load overload protection function, automatically enter the status of self-locking, start overload protection
◆ Set off signal state switching valve position three states: self-locking, fully open, fully closed
◆ state switch to set the input signal for the DC4-20mA or DC1-5V